1.

Workshop on Technical Presentation

To enable the students to learn the proper methods of technical presentation and to emphasize the dare need of presentation skills in professional career.

09 October, 2018

2.

Departmental Orientation for 2018 Session

To give a brief introduction of Mechanical Engineering Department to the fresh minds and to motivate them to increase their interest in Mechanical Engineering.

22 October, 2018

3.

Orientation Seminar of IMechE UET Taxila

To give a brief introduction of IMechE to the fresh minds and to motivate them to increase their interest in Mechanical Engineering.

25 October, 2018

4.

Recruitment Drive ‘18

To induct freshies as a General Members

29-30 October, 2018

5.

Workshop on Adobe Photoshop/ Illustrator

To teach students about the Basics of Graphics Designing and to develop extra skills.

07 November, 2018

6.

SOfE Local ‘18

SOfE being a flagship event of IMechE, challenges young engineer to polish their presentation skills in front of a panel of technical experts & presentation specialists. It also sharpens the skill of effective presentation of complex engineering concepts.   

20 November, 2018

7.

Design Challenge Local ‘18

AKDC being a signature event of IMechE, focuses on project management skills & project-based learning of freshies by providing different scenarios every year. In this competition, participants are required to design & fabricate a device that meets all the conditions provided by IMechE.

19 December, 2018

8.

Road to FYP

Road to FYP is to brief 3rd Year students about Final Year Project and how to pursue it. Moreover, students' questions and misconceptions concerning FYP will be addressed in this workshop.

12 February, 2019

9.

Conference on “IOT in Engineering”

To impact knowledge and importance of IOT to the students of engineering.

20 February, 2019

10.

Interview for new council

Current Cabinet along with advisor had taken interviews to select the upcoming Hierarchy.

20 May. 2019

11.

Handing Over ceremony

A ceremony was held in the presence of Advisors, facaulity members and the New Cabinet.

25 June, 2019

1.

Design Challenge Local ’19

AKDC being a signature event of IMechE, focuses on project management skills & project-based learning of freshies by providing different scenarios every year. In this competition, participants are required to design & fabricate a device that meets all the conditions provided by IMechE.

12 July, 2019

2.

Orientation Seminar ‘19

To give a brief introduction of Mechanical Engineering Department to the fresh minds and to motivate them to increase their interest in Mechanical Engineering.

12 November, 2019

3.

Recruitment Drive ‘19

To induct freshies as a General Members

15 November, 2019

4.

Industrial Tour to VOLTA Battery

IMechE arranged Industrial Tours to different industries with a motto of bridging a gap between academia & industry. It allows engineering students to have exposure of insight of industry.

20 November, 2019

5.

SOfE Local ‘19

SOfE being a flagship event of IMechE, challenges young engineer to polish their presentation skills in front of a panel of technical experts & presentation specialists. It also sharpens the skill of effective presentation of complex engineering concepts.  

7 December, 2019

6.

Seminar on Freelancing

Training Program has been designed which provides contemporary training to aspiring freelancers across all departments.

02 January, 2020

7.

SOfE North ‘19

SOfE being a flagship event of IMechE, challenges young engineer to polish their presentation skills in front of a panel of technical experts & presentation specialists. It also sharpens the skill of effective presentation of complex engineering concepts.  

16 January, 2020

8.

Industrial Tour to Cornet Food Factory

IMechE arranged Industrial Tours to different industries with a motto of bridging a gap between academia & industry. It allows engineering students to have exposure of insight of industry.

20 January, 2020

9.

Seminar on FYP

Road to FYP is to brief 3rd Year students about Final Year Project and how to pursue it. Moreover, students' questions and misconceptions concerning FYP will be addressed in this workshop.

24 February, 2020

10.

IMechE Photography Challenge

Photography Challenge has been introduced for the first time in Pakistan to ‘Capture Engineering in a Photograph’. The photographs will provide an insight into where Pakistan stands today in the modern engineering world.

5 July, 2020

11.

Workshop on SolidWorks

IMechE UET Taxila Student Chapter organizes workshops on SolidWorks - a prime designing software for engineers every year. In these workshops, participants get to know about the basics of SolidWorks and design a solution to different problems provided by the instructor.

22 July, 2020

12.

Handing Over Carmony

A ceremony was held in the presence of Advisors, facaulity members and the New Cabinet.

12 August, 2020

1.

Design Challenge ‘20

AKDC being a signature event of IMechE, focuses on project management skills & project-based learning of freshies by providing different scenarios every year. In this competition, participants are required to design & fabricate a device that meets all the conditions provided by IMechE.

23 August, 2020

2.

Workshop on Pakistan's Power Sector Dynamics and Outlook

The webinar provided a great exposure to the fresh candidates with valuable experts in the industry, solving their various queries regarding this topic. It was a guide to the recent graduates, how might they set themselves up for future undertakings in this field.

3 September, 2020

3.

Workshop on How to stand tall in overcrowded place

The outcomes of the webinar would be long-term financial security, expert leadership, engineering motivation, and much more. It's a tremendous opportunity to make your time valuable. Mark your calendars and get yourself registered for this informative webinar.

8 October, 2020

4.

Orientation Seminar ‘20

To give a brief introduction of Mechanical Engineering Department to the fresh minds and to motivate them to increase their interest in Mechanical Engineering.

08 November, 2020

5.

Recruitment Drive ‘20

To induct freshies as a General Members

14 November, 2020

6.

Webinar on "The Management side of Engineering"

The agenda of the webinar is:

1. Stepping into the Professional World

2. Why Engineers are good managers

3. Communication and networking skills for Engineers

16 November, 2020

7.

IMechE International Membership Drive

This session will be covering the followings:

1. Introduction to the General Body about the Chapter's hierarchy
2. Announcement of thrilling future events
3. Guidance on IMechE membership and it’s benefits

24 November, 2020

8.

SOfE Local ‘20

SOfE being a flagship event of IMechE, challenges young engineer to polish their presentation skills in front of a panel of technical experts & presentation specialists. It also sharpens the skill of effective presentation of complex engineering concepts.   

3 January, 2021

9.

Workshop on Solidworks

IMechE UET Taxila Student Chapter organizes workshops on SolidWorks - a prime designing software for engineers every year. In these workshops, participants get to know about the basics of SolidWorks and design a solution to different problems provided by the instructor.

13 March, 2020

10.

SOfE North ‘20

SOfE being a flagship event of IMechE, challenges young engineer to polish their presentation skills in front of a panel of technical experts & presentation specialists. It also sharpens the skill of effective presentation of complex engineering concepts.  

04 April, 2020

11.

Vision Thread 1.0

Vision Thread 1.0 is the key podcast of IMechE Pakistan. Its core mission is to construct an access for the engineers to the freelancing world. Freelancing is the most efficient modern social activity and a source of handful earnings for the professionals. Therefore, many engineers desire to work as a freelancer as their part time job. So, this podcast will develop a freelancing environment where the engineers will be learning some skills for productive freelancing and asking queries by engaging with an experienced freelancer.

10 April, 2020

12.

CADCruz

CADCruz being a designing competition, allows participants to challenge their CADing skills in a competitive, time-constrained environment. It also provides an opportunity to win a cash prize & geta review from a panel of technical experts on their skills.

23 May, 2020

13.

Handing Over Ceremony

A ceremony was held in the presence of Advisors, facaulity members and the New Cabinet.

25 June, 2020

1.

SOfE North ‘21

SOfE being a flagship event of IMechE, challenges young engineer to polish their presentation skills in front of a panel of technical experts & presentation specialists. It also sharpens the skill of effective presentation of complex engineering concepts.   

18 July, 2021

2.

Team Lead Induction Drive

Promoting executive members to Team Leads and hand over their respective team.

26 July, 2021

3.

Webinar on Beyond the University

This webinar aimed to prepare the graduating engineers and young professionals for their career development

3 October, 2021

4.

SOfE Nationals ‘21

SOfE being a flagship event of IMechE, challenges young engineer to polish their presentation skills in front of a panel of technical experts & presentation specialists. It also sharpens the skill of effective presentation of complex engineering concepts.  

14 November, 2021

5.

Departmental Orientation for 2021 Session

To give a brief introduction of Mechanical Engineering Department to the fresh minds and to motivate them to increase their interest in Mechanical Engineering.

17 November, 2021

6.

Introductory Seminar of IMechE UET Taxila

To give a brief introduction of IMechE to the fresh minds and to motivate them to increase their interest in Mechanical Engineering.

28 November, 2021

7.

Recruitment Drive ‘21

To induct freshies as a General Members

13-14 December, 2021

8.

Seminar on Importance of Polymers in the manufacturing sector of Pakistan

The main purpose of the event is to make engineers more familiar with better visualization and future forecasting capabilities, enhancing simplified and improved manufacturing outputs. The focus of this seminar is to create awareness of Polymer's advanced manufacturing techniques and their industrial applications, especially in pipes manufacturing.

28 January, 2022

9.

Seminar on What we get from OBE

IMechE Student Chapter at UET Taxila organized a seminar related to OBE. The main goal of this event

was to familiarize newcomers with their goals and objectives of outcome base education. Moreover, this

seminar focused on how students intended to study by focusing on disciplinary knowledge, generic skills,

attitudes, and proficiency.

10-11 March, 2022

10.

IMechE International Membership Drive

This session will be covering the followings:

4. Introduction to the General Body about the Chapter's hierarchy
5. Announcement of thrilling future events

Guidance on IMechE membership and it’s benefits

12 March, 2022

11.

SofE Locals’22

SOfE being a flagship event of IMechE, challenges young engineer to polish their presentation skills in front of a panel of technical experts & presentation specialists. It also sharpens the skill of effective presentation of complex engineering concepts.  

24 March, 2022

12

Team Leads Interviews (22-23)

Promoting executive members to Team Leads and hand over their respective team.

20 May, 2022

13.

Industrial Visit to Coronet Foods Limited

To provide exposure to students about practical working environments & will also provide students with a good opportunity to gain full awareness about industrial practices. Moreover, through industrial visit students will become aware of new & the latest technologies being used in industry.

6^th June, 2022

14.

Handing Over Ceremony

A ceremony was held in the presence of Advisors, faculty members and the New Cabinet.

16 June,2022

1.

AKDC Locals’22

AKDC being a signature event of IMechE, focuses on project management skills & project-based learning of freshies by providing different scenarios every year. In this competition, participants are required to design & fabricate a device that meets all the conditions provided by IMechE.

26-29 July, 2022

2.

Executives Induction

Promoting general members to executive members

16-17 Sep, 2022

3.

The Light Bulb Moment Series 2022

This webinar aimed to aware the graduating engineers and young professionals regarding an unconventional career path. It also gives a chance to explore the inner working of the world of startups through the first-hand experience of the people who has created their startups from scratch

16-19 Sep, 2022

4.

Departmental Orientation for 2022 Session

To give a brief introduction of Mechanical Engineering Department to the fresh minds and to motivate them to increase their interest in Mechanical Engineering.

26 Sep, 2022

5.

Life Goals Illusion & Islam

The main agenda of this seminar was to guide youth that how they can balance their day-to-day activities and Islam. It also focused on how a person can        control his emotions (nafs) as it is the cause of major sins

12^th October, 2022

6.

General Inductions

To induct freshies as a General Members

26&27^th October, 2022

7.

JKM SOfE Pakistan Nationals’22

SOfE being a flagship event of IMechE, challenges young engineer to polish their presentation skills in front of a panel of technical experts & presentation specialists. It also sharpens the skill of effective presentation of complex engineering concepts.   

5^th November, 2022

8.

Sports Skeeda

IMechE UET Taxila organized an event named “Sports SKEEDA” for all students to utilize the sports week and indulge IMechE members in hygienic sports and showcase one’s physical & mental skills. Moreover, this competition will also focus on improving young engineer’s soft skills like teamwork, leadership skills

6^th & 7^th December, 2022

9.

Workshop on Reverse Engineering

The Workshop on Functional Reverse Engineering (WRE) is an important event for students interested in this field as it covers a wide range of topics related to reverse engineering, projects & research including its applications in different industries, challenges faced during the process, and the latest tools and techniques being used. By attending this event, students can gain a deeper understanding of this important area of study and develop the skills they need to succeed in their future careers.

16^th & 17^th December, 2022

10.

SolidWorks Workshop Series

To bring students toward the modern & essential skills of 3D Modeling, Designing & Creativity on SolidWorks by giving them hands on experience with the aid of both Nationals & International Speakers.

20^th Feb-13^th March, 2022

11.

Workshop on Presentation

To provides an opportunity to engineers' minds to overcome their lack of communication and presentation skills and gives them the confidence to present their thoughts and ideas into a solid body in front of their proud jurisdiction

9^th March, 2023

12.

Workshop on Poster Designing

To provide them a way how they can effectively use and learn this software by introducing them to several general commands required to make a simple poster and provide them guidance about the alignment, color combinations and do & don’ts of poster designing so that they may get proficient in presenting their products & ideas with best illustrations

11^th April, 2023

13.

Industrial Tour to OGDCL

To provide exposure to students about practical working environments & will also provide students with a good opportunity to gain full awareness about industrial practices. Moreover, through industrial visit students will become aware of new & the latest technologies being used in industry.

11^th May, 2023

14.

Toastmaster Sessions

To polish the communication skills of students as well as to groom themselves professionally. This session is divided into two parts: prepared and table topics speech. For prepared speeches the topic is given to participants 24 hour before the session. And for Table topic is assigned on spot during the commencement of session..

Every Friday

15.

Technical Paper Competition

To provide IMechE members & students with a platform to develop their presentation and technical report writing skills on any certain topic. Technical writing helps a person better understand technology and it also increases his or her ability to adopt new technology

14^th May, 2023

16.

AKDC Locals’23

AKDC, being a signature event of IMechE, focuses on project management skills & project-based learning of freshies by providing different scenarios every year. In this competition, participants are required to design & fabricate a device that meets all the conditions provided by IMechE.

25^th May, 2023

17.

SOfE Locals’23

SOfE being a flagship event of IMechE, challenges young engineer to polish their presentation skills in front of a panel of technical experts & presentation specialists. It also sharpens the skill of effective presentation of complex engineering concepts.  

29^th May, 2023

18.

Team Lead Inductions (23-24)

Promoting executive members to Team Leads and hand over their respective team.

5^th June, 2023

19.

Handing Over Ceremony

A ceremony was held in the presence of Advisors, faculty members and the New Cabinet.

15^th June, 2023